House / Building Stainless Steel Ceiling Panels Durable Environmentally Friendly

Stainless Steel Ceiling Panels And Metal Ceiling Panel For House Building

Stainless Steel Ceiling Panels And Metal Ceiling Panel For House Ceiling Technology

• Determine the height and use the ink bucket to play a high level on the wall;
• Fix the hanging ribs on the top with iron expansion bolts, and fix the light steel keels below the hanging ribs to maintain the level (if the span of the grid does not exceed 3 meters, there is no need for hanging ribs);
• Nail the aluminum corner line along the horizontal line with cement nails;
• Put the stainless steel or aluminum grille on the ground to complete the assembly;
• Place the assembled grille ceiling on the stainless steel or aluminum angle iron. The middle position is directly tied to the light steel keel with fine wire.

Construction Of Stainless Steel Ceiling Panels And Metal Ceiling Panel For House Ceiling

• Construction process of stainless steel metal ceiling

Accurate measurement → keel finishing → surface planing → open half-slot lap joint → flame retardant coating → clear oil coating → install frosted glass

• Construction points

The grille frame should be made to accurately measure the size of the ceiling.
The keel shall be finished, the surface shall be planed, and the joint shall be open. The intersection of the horizontal and vertical keels shall be overlapped by a half-slot and shall be treated with a flame retardant.

Stainless Steel Ceiling Panels And Metal Ceiling Panel For House Ceiling

• Stainless steel metal ceiling, widely used in large shopping malls, restaurants, bars, waiting rooms, airports, subways and other stations, generous and beautiful, as long as new. It is one of the commonly used ceiling materials for decoration companies. Well received by customers.

Stainless Steel Ceiling Panels And Metal Ceiling Panel For House Ceiling Specifications

• The standard is 10mm or 15mm and the height is available in 40mm, 60mm and 80mm. Stainless steel or aluminum grille grid sizes are available in 50X50mm, 75X75mm, 100X100mm, 125X125mm, 150X150mm, 200X200mm. The regular grid size of the chip grille is (mm): 10*10, 15*15, 25*25, 30*30, 40*40, 50*50, 60*60

Some Of Our Projects