Beautiful Durable Stainless Steel Floor Drain Odor Resistant Various Material Available

Stainless Steel Floor Drain For Building House And Construction

Floor drain material

Mainly cast iron, PVC, zinc alloy, ceramic, cast aluminum, stainless steel, brass, copper alloy and other materials.

• Cast iron: cheap, easy to rust, not beautiful, rust and hang after sticking dirt, not easy to clean;
• PVC: cheap, easy to be affected by temperature deformation, scratch resistance and impact is poor, not beautiful;
• Zinc alloy: cheap, very easy to corrode;
• Ceramic: cheap, corrosion-resistant, not resistant to impact;
• Cast aluminum: price mid-range, light weight, rough;
• Stainless steel: moderate price, beautiful, durable;
• Copper alloy: moderate price, use type;
• Brass: heavy, high-grade, high price, the surface can be electroplated.

Stainless steel floor drain introduction

• English name: stainless steel floor drain
• Stainless steel floor drain is the drainage device connected to the ground and the drainage pipe system.
• The special features of stainless steel floor drain:It excludes the surface water, the water quality is worse than any other equipment, solid matter, more fibrous materials, hair, easy deposits, etc.

It is different from other materials such as zinc alloy, copper and other materials and has its unique characteristics. Excellent price and low price, at the same time it has 304, 201 and other materials, the price is moderate, suitable for different levels of consumer demand,

• Stainless steel floor drains should be selected in accordance with the following requirements:

(1) Water seal and odor-resistant floor drain should be preferred
(2) Where sanitary standards require high or non-requisite use of floor drains, water seals and odor-resistant floor drains shall be provided.

Stainless steel floor drain selection points

• Water seal is one of the important features of water seal floor drain. When selecting, you should know whether the water seal depth of the product reaches 50mm. At present, some floor drain seals on the market have a depth of only 10 to 20 mm, which cannot effectively block the odor of the sewer.

Side wall type floor drain, with frame floor drain, closed type floor drain generally do not have water seal; anti-overflow floor drain, multi-channel floor drain mostly with water seal, should be clearly understood according to the manufacturer's information when selecting.
For drains without water seal, the depth of the drain seal should be no less than 50mm. This component can be configured by the floor drain manufacturer or by the construction unit where the floor drain is installed.

• The height of the floor drain rafter can be adjusted, and the height adjustment is not less than 35mm to ensure that the floor drain surface level and the ground level after the ground decoration is completed. The waterproof wing ring is provided for the floor drain to ensure the waterproofing of the floor drain when it is installed on the floor.

The floor drain of an underground garage car passage or a load-bearing place shall have the strength of the rafter to meet the corresponding load.

• The structure with water seal floor drain should be reasonable and smooth, and the debris in the drainage is not easy to settle; the cross-sectional area of ​​the cross section of each part should be larger than the cross-sectional area of ​​the discharge pipe, and the minimum net width of the cross section of the flow channel should not be less than 10mm.
• There are three ways to connect the floor drain: socket; thread; clamp. The size of the connection port can be determined according to the relevant regulations of the current state.

The main function of the floor drain

(1) Drainage
(2)) Seal
(3) Deodorization
(4) Prevent flammable gas from entering the room and prevent it from happening
(5) Anti-mosquito

Some of our projects